The hot melt adhesives are solid adhesives

which pass into liquid state by means of heat, and then return to cooling solids after being coated on the surfaces to be glued using special coating machines.

This adhesive family is characterized by excellent resistance to temperature, fast bonding and 100% use of the product.

The following adhesives for wood belong to the family of hot melt adhesives:

Sort By
Categorie
Hot melt adhesives

Primer for wood solvent based,

suitable for edges in hard plastic materials, especially for edges in phenolic plastic and solid wood, which are then glued with hot melt adhesives ANCORFUSION.

Salient Features of the primer PREPARATORE AF:
– product of low viscosity.

Notes:
Applied by brush or spray.

Belonging to the family of hot melt adhesives for wood.

This glue in granules is ideal for bonding solid wood edges, polyesters, melamine, laminates, PVC and ABS.

Features of the adhesive ANCORFUSION 078 K:
– Rapid open times.

Notes:
Applied on one side with edge-banding line standards.

Belonging to the family of hot melt adhesives for wood.

ANCORFUSION K 036 is an adhesive in granules mostly used with manual edge banding, on shaped panels or straight edges for gluing veneer, melamine, laminates, ABS and PVC.

Salient Features of the adhesive ANCORFUSION K 036:
– medium viscosity;
– long open time.

Notes:
Applied on one side with manual beading machine or scheduled.

Belong to the family of hot melt adhesives for wood.

ANCORFUSION K 872 is an adhesive EVA based granules of the most effective, due to its intrinsic properties that make it particularly suitable for coating profiles with sliced machines type Friz, Barberan or similar

Salient features of the adhesive ANCORFUSION K 872:
– high bonding capacity;
– low viscosity;
– excellent hot tack.

Notes:
Applied on one side with edge-banding lines

Belonging to the family of hot melt adhesives for wood,

ANCORFUSION K 849 G is an EVA based in granules adhesive for the most suitable of bonding of linear edges through soft forming and for profiles.

Salient Features of the adhesive ANCORFUSION K 849 G:
– High thermal resistance;
– Short open time.

Notes:
Applied from one side, with edgebanding line.

Hot melt adhesives
Primer for wood solvent based, suitable for edges in hard plastic materials, especially for edges in phenolic plastic and solid wood, which are then glued with hot melt adhesives ANCORFUSION. Salient Features of the primer PREPARATORE A Read More
Belonging to the family of hot melt adhesives for wood. This glue in granules is ideal for bonding solid wood edges, polyesters, melamine, laminates, PVC and ABS. Features of the adhesive ANCORFUSION 078 K: – Rapid open times. Notes: Ap Read More
Belonging to the family of hot melt adhesives for wood. ANCORFUSION K 036 is an adhesive in granules mostly used with manual edge banding, on shaped panels or straight edges for gluing veneer, melamine, laminates, ABS and PVC. Salient F Read More
Belong to the family of hot melt adhesives for wood. ANCORFUSION K 872 is an adhesive EVA based granules of the most effective, due to its intrinsic properties that make it particularly suitable for coating profiles with sliced machines Read More
Belonging to the family of hot melt adhesives for wood, ANCORFUSION K 849 G is an EVA based in granules adhesive for the most suitable of bonding of linear edges through soft forming and for profiles. Salient Features of the adhesive AN Read More