These are water dispersion adhesives for a wide variety of gluing, easy to use, odorless, non-toxic. Even in this case, the aforementioned intrinsic properties of such adhesives make them ideal for use in the marine and automotive indistries.
Their application is normally made on one side except for special bonding where a smaller quantity of product is recommended but on both surfaces.
This cyanoacrylate adhesive is characterized by the instant bonding of hard, non-porous surfaces : this is best used in / for the fields of marine and automotive .
ANCORCRILL 100 is offered in convenient vials of 50 or 500 grams.
Salient features for the adhesive ANCORCRILL 100:
- good tack;
- quick yield.
To be applied on one side.
Belong to the family of water-based adhesive for marine and automotive.
ANCORFIX ABM 400 is a mono-compenente glue used in the marine and automotive industries for bonding foam resins on wood , textiles and similar materials.
Appreciated because it is easy to use , of the many bonding adhesive on the market this one does not require any particular preparation in the application ( as in the case of two-component ).
Salient features for the adhesive ANCORFIX 400 ABM:
- excellent initial tack;
- quick grip.
To be applied on two sides.
Belong to the family of water based glues.
ANCORVIL WHD is a suitable vinyl glue for bonding both hard and soft woods for the industry of the nautical decor and interior design (nautical).
Class D3 adhesive conforms to EN 204/205 D3 and the test of heat resistance of 91 watts, with the addition of the suitable hardener Desmodur DN it reaches the strength class D4 .
Salient features for marine vinyl glue ANCORVIL WHD:
- Used with both cold and hot to optimize the timing of production
It is applied with a brush or roller metering nozzle under pressure